Monday, January 17, 2022

My concept mobile - 220117Mo

  My concept mobile  
.
Version: 220117Mo
.
Other versions
Version Link
Nil Nil
.
Although I never had any interest in having any kind of mobile, but still I have had interest in acquiring information about different kind of mobiles. Mobile’s size, color, abilities and price used to be my main interest. With passage of time information I was gathering about mobiles slowly, slowly started to create an idea in my mind about my concept mobile.
.

.
[ Basic features so far of my concept mobile. ]
Following is the summery outline of the basic features of my concept mobile.
.
Basic features so far of my concept mobile are
It’s price and maintenance will be affordable.
It’s processor will be fast, accurate and durable.
It’s display screen will have a good size with ratio of 1.77.
It’s resources e.g. memory, battery charge etc will not end/get-consumed easily/quickly.
It’s design and color will be attractive.
It’s abilities of networking and contacting with other devices will be of high quality.
It’will be made of many panels giving it look of a book/copy/etc. Each panel will be for a particular purpose e.g. display, memory, batteries etc.
Plus It will have features I am not discussing in this post/article. May be I will discus them in next blog posts/articles here.
.
.

.
In this background a few days ago on one cold night of January 2022 my eyes fell upon an out of use cardboard box in the dining room of our home. I quickly made an idea of making a prototype of my above discussed concept mobile from it. For this purpose I took a small sized kitchen knife and cut that cardboard box according to the required measurements. I actually made four rectangular pieces having size nearly like smart mobile phones. Then I fixed those four rectangular pieces together using masking tape in such a way that those pieces took the shape of a copy/book/etc.
.
[ Mobile's different panels explained ]
First think of my concept mobile as a book/copy. Just like a book/copy have front and back covers and pages in between it's covers my mobile will have front panel, rear panel and a few more panels in between it's front and rear panels. Mobile’s each panel will be for one or more specific purpose as explained below.
[ (a) - Front panel ]
This panel will contain display screen, front/selfie camera, many slots for SIM's and mobile's mother-board, processor etc.
[ (b) - Rear panel ]
This panel will contain rear cameras and many batteries. Idea is to make mobile continuesly work at full capacity for a full month after a full charge.
[ (c) - In between panels ]
They will be set of a few panels as explained in the following.
[ (c-1) - Memory panel ]
 This panel will have a lot of slots for installing Ram, Internal and External storage media. This mobile will have single memory-set working as RAM and Internal memory with capacity of multiple of Terabytes.
[ (c-2) - SIM panel ]
 This panel will have a lot of slots for installing a lot of SIM's in it. (Update: Mobile will not have this panel.Slots for sim will be available in front panel)
[ (c-3) - Expansion panel ]
 This panel will have a lot of slots for installing expansion cards for increasing features of mobile and/or adding feature to mobile.
[ (c-4) - Battery panel ]
 This panel will have a lot of slots for installing batteries. Idea is to make mobile continuesly work at full capacity for a full month after a full charge.
.
[ My concept mobile's different panels ]
Panels of my concept mobile are explained in the following photo.
.
.
.

.
In the following I will further explain my concept mobile with the help of photos I took of it’s above mentioned basic prototype. These photos will also describe steps I took during making prototype of my concept mobile.
.
[ Step # 1 ]
In this step I got two rectangular cardboard pieces of same size by cutting a out of use cardboard box using a small kitchen knife. Knife can be seen in the photo for "Step # 2".
.
.
.

.
[ Step # 2 ]
In this step I got four rectangular pieces of the same size by cutting the two pieces I got in the previous step "Step # 1". For cutting I used the small kitchen knife and for measuring size of required panels I used thread. Both can be seen in the following photo for this step "Step # 2".
.
.
.

.
[ Step # 3 ]
After getting four cardboard pieces, as described in the above steps, I attached all those four pieces together with the help of a masking tape. Their final shape and purpose is described in the following photo of this step "Step # 3".
.
.
.

.
[ Front and Rear view of mobile prototype ]
Following are the photos of my concept mobile displaying it's front and rear view. After making this prototype I made an idea that mobile will be of almost the same size as this prototype is.
.
.
.
.
.

.
Colors used for Border and Background of this post
Color HSL RGB Hex
 
0, 0%, 50% 127, 127, 127 #7f7f7f
 
0, 0%, 89% (228, 228, 228 #e4e4e4
.

.
If there are any mistakes in this post then I will remove them whenever I will know about them.
.


No comments:

Post a Comment